UCM/LOG
Product Specification
| Model | UCM/LOG |
|---|---|
| Purpose | Logic Control for Automation. No I/O |
| Plug-in Interface | Ethernet/Wi-Fi |
| Input/Output | |
| Controller Inputs | 0 |
| Controller Outputs | 0 |
| Max Inputs (with Slave/LEM) | 0 |
| Max Outputs (with Slave/LEM) | 0 |
| Expansion I/O with IRIO | 120 |
| Infrared Signal from Outputs | N/A |
| No of Infrared codes (sending) | 128 |
| Infrared Receive function (RIO or KP04) EEPROM File System |
40 |
| Alarm | |
| Intruder Alarm Function | No |
| Dial to Central Monitoring System | N/A |
| No of Phones to dial out in Alarm | N/A |
| Zone Types (Prgrammable) | N/A |
| Alarm Zone Types | N/A |
| Alarm Types (programmable) | N/A |
| Arm Security Modes | N/A |
| Siren/Sound Types | N/A |
| Event Log Events | N/A |
| Programmable Exit/Entry delays | N/A |
| Dedicated Tamper Input | No |
| Siren/Bell Output 12V | No |
| Speaker Output (for alarm) | No |
| Srobe Output | No |
| No of Alarm Partitions | N/A |
| Partition Siren Output | N/A |
| No of Alarm Users with authorisation codes | 16 |
| Supervsion = Phone Line Cut | N/A |
| Supervision – Zone wiring Cut | N/A |
| Supervision – Bus Communications failure | N/A |
| Supervision – Power Failure | N/A |
| Supervision – Low Battery | N/A |
| Voice | |
| Voice Menu on Keypad | No |
| Voice Menu on Phone | No |
| Recorded Messages | No |
| Multi-languages | No |
| Announcement of open zones and alarms | No |
| Schedule | |
| Weekly Schedule/Time Programs | 32 |
| Internet Time Sync (with ETH03) | Yes |
| Daylight Saving Time adjust (with ETH03) | Yes |
| Programming | |
| Programming by Keypad | No |
| Programming by PC (Need UCM) | Yes |
| iOS/Android app (requires ETH03) | Yes |
| Protocol for 3rd party systems | Yes |
| Firmware Upgradeable | Yes |
| Event-based Responses | Yes |
| No of Programmable Responses | 512 |
| Bytes for each Response | 8 |
| Programmable Responses | |
| Zones On & Off | Yes |
| Alarm Activated | Yes |
| Armed to Away/Night/Day & Disarmed | N/A |
| Time Program/Schedule | Yes |
| Hourly | Yes |
| Sunrise/Sunset | Yes |
| Keypad Function Keys | Yes |
| Counters | Yes |
| Sensors | Yes |
| If/Then/Else Conditions | Yes |
| Registers | |
| No of Counters (16 bits) | 255 |
| Nonvolatile counters | 32 |
| No of Flags (1-bit) | 256 |
| Nonvolatile Flags | 256 |
| No of Sensors (16 Bits) | 32 |
| Enhanced EMS Sensors | No |
| Expansion Modules | |
| No of Slaves (8 Input/8 Output) | 0 |
| No of UCMs (Communications Modules) | 8 |
| No of Keypads | 0 |
| No of IRIO (Inteligent Input/Output) | 15 |
| No of HIO (Hotel I/O) | 15 |
| No of RIO Remote I/O) | 15 |
| Plug in Ethernet/Wi-Fi Module | Yes |
| Plug in LEM02B 8 Inputs (to Main and Slave) | No |
| LEM01 (8 in, 8 Out) for Main and Slave | No |
| Interfaces | |
| USB Interface (UCM/USB) | Yes |
| Ethernet Interface (UCM/Eth03) | Yes |
| Wi-Fi Interface (UCM/Wi-Fi) | Yes |
| RS232 Interface (UCM-232) | Yes |
| GSM/SMS Interface (UCM.GSM) | No |
| Cbus Interface (UCM/Cbus) | Yes |
| KNX Interface (UCM/KNX) | Yes |
| Modbus Interface (UCM/Modbus) | Yes |
| 3rd Party Interface (UCM/Universal) | Yes |